التواصل مع مزود؟ المزود
Andy Lou Mr. Andy Lou
ماذا يمكنني أن أفعل لك؟
الاتصال المورد
 رقم الهاتف :86-0371-64124536 الالكتروني:Carbon@electrodepaste.com
High Quality Graphite Electrode for Sale
High Quality Graphite Electrode for Sale
High Quality Graphite Electrode for Sale
High Quality Graphite Electrode for Sale
High Quality Graphite Electrode for Sale
  • High Quality Graphite Electrode for Sale
  • High Quality Graphite Electrode for Sale
  • High Quality Graphite Electrode for Sale
  • High Quality Graphite Electrode for Sale
  • High Quality Graphite Electrode for Sale

High Quality Graphite Electrode for Sale

    الدفع نوع: L/C,T/T,D/P
    Incoterm: FOB,CFR,CIF,EXW,FCA
    أدني كمية الطلب: 20 Metric Ton
    موعد التسليم: 5 أيام

معلومات أساسية

نموذج: φ200-800mm Grade UHP HP RP

اكتب: أقطاب الجرافيت

تكوين: كربيد

محتوى الكربون: ارتفاع الكربون

درجة: الصف الصناعية

تشكيل الطريق: مقذوف الجرافيت

الكريستال مورفولوجيا: البلورية المدمجة

Ash: Max 0.3%

Resistivity: 4.8-5.8

Bulk Density: 1.68-1.74

Modulus Of Rapture: 10-14

Young's Modulus: 10-14

CTE: 1.1-1.4

Additional Info

تفاصيل التعبئة والتغليف: By export standard wooden pallet

إنتاجية: 50000/year

علامة تجارية: Carbographite

نقل: Ocean,Land,Air

مكان المنشأ: China

تفاصيل التجارة القدرة علي التوريد: 200t/month

الشهادات: SGS, IKA

رمز النظام المنسق: 85451100

ميناء: Tianjin,Qingdao

وصف المنتج


GRAPHITE ELECTRODE
Introduction

Graphite Electrode is produced artificially by using carbon and selected binding materials such as pitch or tar. The specific characteristics of graphite electrode are:

■Low electrical resistivity

■Good lubrication properties

■High thermal conductivity

■High thermal shock resistance

■Chemically stable

Manufacturer

The basic production steps in the manufacture of graphite electrode comprise the following:

■Forming

■Baking

■Impregnation

■Graphitising

■Machining

Forming

The coke is crushed into specific particle sizes, depending on the final diameter and the individual application of the graphite electrode. To bind the coke particles, controlled amounts of pitch are added.

The resulting plastic mix is extruded through a forming press and cut into specified lengths, making the "green graphite electrode".

Baking

The baking process is carried out at temperatures of 800°C - 1200°C. The pitch is carbonizing at this point and about 40% of the pitch evaporates.

Impregnation

Bulk density and other physical properties can be improved by further pitch impregnation. All Carbographite graphite electrode are impregnated in this way. This is why the regular power grade achieves minimum bulk density of 1,62 g/cm3.

Graphitising/Graphitization

The graphitising process takes place at approximately 2800°C - 3200°C. The amorphous carbon is transformed into graphite.

Machining

Finally the electrodes are machined to specified dimensions according to IEC 60239:2005 standard.

Tech Data
DESCRIPTION
Regular Power Type RP
High Power Type HP
Ultra High Power UHP
Resistivity 
7.0-10.0
5.8-6.6
4.8-5.8
Bulk Density g/cm3
1.53-1.56
1.64-1.68
1.68-1.74
Ash %
5
3
3
graphite electrode 5

Current Load and Current Density

graphite electrode 6

Specification of Nipples

graphite electrode 1 graphite electrode 2

Types of Electrodes

The correct type of graphite electrode for varying operating conditions is mainly influenced by the maximum current carrying capacity. The following table shows the different electrode types and their matching current carrying capacities and will provide a rough idea for selection of Rongxing graphite electrode.

Type HP Graphite Electrode

High power grade HP Graphite Electrode is for foundry operations (electric arc furnace: EAF) and for ladle furnaces (LF) and occasionally for electric arc furnace operations, if the furnace parameters are suitable.

Type UHP Graphite Electrodes

Ultra high power grade UHP Graphite Electrode is suitable for electric arc furnace operations and ladle furnace operations with heavy current loads.

graphite electrode 3

Maximum Current Load for EAF

graphite electrode 4

Maximum Current Load for LF

Storage and Handling

Carbographite Graphite electrode are produced with tight tolerances to ensure the satisfaction of our customers. To run your furnace without problems you have to take care not to damage any parts of the electrodes. Therefore it is essential to keep the graphite electrodes in their wooden cases until you are ready to use them on the furnace. Damage to end faces and to the threads of the socket can cause failure.

Installation

Electrodes which are not equipped with preset nipples:
- first require a nipple inserting. It is essential to ensure the socket and nipple are clean before insertion.

Screw the lifting eye into the empty socket of the graphite electrode and ensure that the socket threads are not damaged.
Protect the opposite end of the electrode and nipple when lifting.
Before assembling the two electrodes - clean the socket of the lower electrode with compressed air.
Put a spacer between the electrodes to prevent damage to the socket and the nipple when lowering the new graphite electrode by crane. Remove the spacer and tighten the joints.
To ensure efficient operation we recommend the following tightening torques. Excessive torque damages the graphite electrode, insufficient torque causes loose joints and hot spots.


Re-machining



If you have broken graphite electrode please feel free to contact us. We will be pleased to supply you with information regarding re-machining and recovery of scrap electrodes.

Graphite Electrode Sales Manager (2)






فئة المنتج : HP الجرافيت الكهربائي > HP 500 الجرافيت الكهربائي

البريد الإلكتروني لهذا المورد
  • Mr. Andy Lou
  • يجب أن تكون رسالتك بين 20-8000 الأحرف

Related Products List

الصفحة الرئيسية

Phone

Skype

تحقيق

豫ICP备19009362号